
Allparts BPHM Paddle-Head Replacement Bass Neck
Featuring a 7.25-10" compound fretboard radius and 20 jumbo frets for maximum comfort, our BPHM is a more contemporary bass neck that comes with a...
View full detailsFeaturing a 7.25-10" compound fretboard radius and 20 jumbo frets for maximum comfort, our BPHM is a more contemporary bass neck that comes with a...
View full detailsFeaturing a rosewood fretboard, 7.25-10" compound fretboard radius and 20 jumbo frets, our BPHR is a more contemporary bass neck that comes with a ...
View full detailsOffering a flatter 12" radius, a comfortable D-shape profile, and the extended range of a 5th string, the BRO-5 will appeal to those craving a more...
View full detailsFeaturing a 12" fretboard and 22 jumbo frets, our PHR is a more contemporary neck that comes with a fully customizable headstock! Complimented by ...
View full detailsOur SMNF replacement neck for Stratocaster® is “officially licensed by Fender®” and made to exacting quality standards in Japan. From the smaller ...
View full detailsOur SMVF-C replacement neck for Stratocaster® is “officially licensed by Fender®” and made to exacting quality standards in Japan. With its C-shap...
View full detailsOur SRVF-C replacement neck for Telecaster® is “officially licensed by Fender®” and made to exacting quality standards in Japan. With its comforta...
View full detailsOur TMF replacement neck for Telecaster® is “officially licensed by Fender®” and made to exacting quality standards in Japan. With 21 vintage fret...
View full detailsOur TMTF-FAT replacement neck for Telecaster® is “officially licensed by Fender®” and made to exacting quality standards in Japan. Like the TMNF-F...
View full detailsOur TMVF-C replacement neck for Telecaster® is “officially licensed by Fender®” and made to exacting quality standards in Japan. With its C-shape ...
View full detailsOur TRF replacement neck for Telecaster® is “officially licensed by Fender®” and made to exacting quality standards in Japan. With 21 vintage fre...
View full detailsOur TRVF-C replacement neck for Telecaster® is “officially licensed by Fender®” and made to exacting quality standards in Japan. With its C-shape ...
View full detailsAllen key holder with the matching Allen keys 2.5 mm and 3 mm wrench sizes. Installation on the rear side of the headstock. technical specification...
View full detailsFlatmount bridge with adjustable height, intonation and string spacing (roller bridge saddles) The roller bridge saddles reliably minimize string b...
View full details5-string Bass Bridge The roller bridge saddles reliably minimize string breakage while maintaining intonation and tuning stability. 3-dimensional a...
View full detailsABM height adjustable Brass nut for Fender ® guitars, 1-5/8" x 3/16" x 1/8".
ABM height adjustable Brass nut for Gibson ® guitar, 1-11/16 x 5/16 x 3/16".
Earvana Drop-in compensated nut for Fender ® guitars, curved bottom, 1-11/16".
Danelectro Aluminum nut for Long Horn bass, with screw.
Schaller R-2 locking nut, 1-5/8" wide, 10" radius, 1-3/8" string spacing. Made from hardened steel.
250K ohm audio taper, Bourns 500 premium series, split shaft, 3/4" long bushing, with hardware.
Stud mount adjustable bridge, 2-3/32" string spacing, 3-1/4" post spacing.
String lock screws (6 pcs.), for Schaller locking tremolo, short, no head, Black.
Replacement body forJazz Bass ®, Swamp Ash, unfinished and sanded smooth. Traditional routing.
Replacement body for Jazz Bass ®, Alder. Finished in 3-tone Sunburst under hard polyurethane.
Replacement body for Jazz Bass ®, Alder. Finished in Fiesta Red under hard polyurethane.
LT-0469-000 Small Fret WireA=0.082"B=0.105"C=0.051"D=0.055"E=0.024"F=0.037"2 FOOT LENGTH
Seven piece fine screwdriver set with handle and 12 swappable screwdrivers. Torx head (6-pointed star):T5, T6, T8, T10, T15, T20 Phillips head:PH00...
View full details1/4" box truss rod wrench, with Philips head screwdriver on end.
Rubber bands to hold binding while drying, electric guitars, 5" x 5/8", 1 lb..
Extra sanding belts for Sanding detailer, 5 pieces – 1200 grit.
Based on our most popular neck, our PHM-S1C neck offers all the same benefits as our SMO-C Stratocaster® replacement neck in a "paddle-head" versio...
View full detailsJohnny Smith style PU cover, attach to pickguard, neck position.
Our PEF replacement neck for Precision Bass® is “officially licensed by Fender®” and made to exacting quality standards in Japan. With a wider 1-5...
View full detailsVolume knobs (2), plastic, for Strat ®, fits USA split shaft pots.
Replacement body for Stratocaster ®, unfinished and sanded smooth. Swamp Ash, 1 humbucker and rear routing.