Best selling products

Bone nut for Gibson® electric guitars with string slots, 1-11/16 x 3/16" x 11/32”.

Pickguard screws Gibson ® size (20 pcs.) phillips head, #3 x 3/8".

Gibson ® style strap buttons (2) with screws, Gotoh.

Pickguard for Gibson ® Les Paul ®.

This bell-shaped truss rod cover is a suitable replacement for many Gibson® branded instruments.

Back plate & switch cover combo for Gibson® Les Paul®, 1-ply. Part number PG-0814

Compensated bone saddle for Gibson ® guitars 2-13/16 inch x 1/8 inch x 15/32 inch.

Nut for Gibson ® Les Paul ®

Leather replacement handle, with buckles, for guitar case.

Studs and anchors only for stop tailpiece, fits Gibson ®, 5/16" - 24.

Switchcraft straight toggle switch, pre-tinned at factory, with knurled nut & knob, for 3 pickup Gibson ®.

Reverse "belly up" pin bridge for Gibson ®, Rosewood, 6-1/4" long, 2" spacing.

Pickguard bracket screws, nut and washer, Nickel.

Truss rod nuts (4 pcs.) for Gibson ® guitars, (10-32) Brass.

Pickguard for ES-335® short.

Tortoise pickguard with hummingbird imprint and adhesive backing.   - This is not a vintage correct Pick guard for a Gibson® Hummingbird

Floyd Rose ® style locking nut for 1-5/8" nut width, includes hardware. Allparts #BP-0026. String Spacing 1-13/32" Length: 1-5/8" Width: 5/8" Radi...

Switchcraft right angle switch for double neck guitar. 4-pole pre-tinned at factory, with knurled nut and knob. Commonly used on double-neck 12...

Tremolo arm for SG ® style tremolo, Nickel, with hardware.

Bass bridge saddles for Gibson ® bass tunematic, with screws (set of 4), Nickel.

Floyd Rose ® style locking nut for 1-5/8" nut width, includes hardware. String Spacing 1-7/16" Length: 1-11/16" Width: 5/8" Radius: 12"

Replacement Pickguard for L-5 ® cutaway, with 5-ply binding. Nitrocellulose may not be as scratch resistant as original hard plastic on some models. 

Pickguard for L-5 ® non-cutaway, with 5-ply binding.

Plastic slotted nuts for Gibson ® guitars, 1-11/16 x 9/32 x 7/32" (10 pcs.).

Pickguard for Gibson® Les Paul®, vintage style with no beveled edges in ivory.  

Fret Wire A= 2.70mm .106" B= 2.80mm .110" C= 1.00mm .039" D= 1.80mm .071" E= 0.60mm .024" F= 0.95mm .037" 2 Foot Length

Pickguard for Gibson ® Les Paul ® Deluxe (small pickups), Cream 1-ply.

Humbucking neck pickup for bass, with Chrome cover, ceramic magnet. Screws included. For replacement screws see GS-0005

Pickguard for ES-335 ® long.

Trapeze tailpiece with three parallelograms for Gibson ® 175 ® and L-5 ®. 7-15/16 in. long 5-3/8 in. from top to hinge 2.25 in. bracket

Pickguard for SG ®, 2-humbucking (5 holes).

The TonePros® locking Studs are designed to lock down any wraparound bridge or stop tailpiece. TonePros locking studs provide 100% of the contact a...

This is a replacement nameplate cover for the Vibramate V7-335 Mounting Kit designed for Arch Top guitars.  It can also be used on any other guitar...

Wiring kit for Gibson ® Les Pau ® and similar style guitars. Contains the following parts:1x EP-4367-000 Switchcraft 3-way switch1x EP-0055-000 Swi...

Single action Gribson ® style truss rod, 18.25 in.

Description: SKU: 250784160 400 ml Aerosol Spray Application: All Guitars Relic look guitars are all the rage these days - now do your own with thi...

Now you can install a Bigsby B7 Vibrato on your arch top guitar without drilling any holes! The Vibramate V7-335 Model Mounting Kit is designed fo...

TonePros TP6R provides superior performance on all Bigsby-style tremolo equipped guitars. The TonePros design roller saddles are engineered to allo...

The TonePros System II Bridge and Tailpiece components come as a package set, ready to install on your guitar. The package includes: 1. TonePros Pa...

ABM height adjustable Brass nut for Gibson® guitar, 1-11/16 x 5/16 x 3/16". Part number BN-0888-008. 

The TonePros Model NVR2P is an AVR2 style bridge engineered with vintage accuracy, modern technology, and compatibility in mind. This second genera...

Wiring kit for Gibson ® ES-335 ® guitars. Contains the following Allparts replacement parts:1x EP-4365-000 Switchcraft Right Angle Toggle Switch2x ...

Wiring kit for Gibson ® Les Paul ® / SG ® Jr. Contains the following parts:2x 500K vintage style split audio pots 1x EP-0055-000 Switchcraft input...

Wiring kit for Gibson® SG® Guitars or any 2-humbucker with toggle setup. Contains the following parts:1x EP-4365-000 Switchcraft Right Angle toggle...

Description: The PT-6010-00 is a great option to upgrade the nut on your Gibson USA guitars made 2014 models and before. Or any other similar g...

TonePros is proud to introduce their new line of Professional Upgrade Tuners!  Utilizing innovative new technologies and materials, the Professiona...

A true to “50’s Vintage” style lightweight Aluminum Tailpiece Set with TonePros Locking Feature. The aluminum body provides an extra resonant quali...

Description: The PQL-6010-00 is the perfect option to replace and upgrade the nut on your Gibsonelectric guitar made before 2014. Or any other ...