Allparts Slotted Bone Nut for Gibson® Electric
Bone nut for Gibson® electric guitars with string slots, 1-11/16 x 3/16" x 11/32â€.
Bone nut for Gibson® electric guitars with string slots, 1-11/16 x 3/16" x 11/32â€.
Slotted bone nut with radiused bottom for Fender®, 1-11/16" x 1/4" x 1/8". Allparts #BN-0206.
Bone nut for Epiphone ® guitars with string slots, 1-11/16" x 1/4" x 3/8".
Nut blocks (3) for Floyd Rose ® or Schaller locking nuts, with screws.
Finger board inlay dots, 1/4" 6.35mm (50 pcs.).
Bone nut with radiused bottom for Fender ®, 1-11/16" x 1/4" x 1/8".
Slotted bone nut for acoustic guitar, 1-11/16" x 3/16" x 11/32".
This bell-shaped truss rod cover is a suitable replacement for many Gibson® branded instruments.
Slotted radiused bone nut with flat bottom, 1-11/16" x 1/4" x 1/8".
Double action truss rod. Measures 18 and 3/32 x 1/4 wide x 3/8 inch. Allows for both forward and backward adjustments of the truss rod to correct...
View full detailsRadiused bone nut with flat bottom, 1-11/16" x 1/4" x 1/8".
Bone nut for P.Bass ®, with string slots, 1-5/8" x 1/8" x 3/16".
Bone nut for J.Bass ®, with string slots, 1-9/16" x 1/8" x 3/16".
Unbleached bone nut with radiused bottom for Fender ®, 1-11/16" x 1/4" x 1/8".
Bone nut shaped for Martin ® guitars with slanted bottom and sides.
Slotted bone nut for Martin ® guitars with angled sides and bottom. 3/4" width
Unbleached "Vintage" bone nut blank 2-1/16" x 3/8" x 3/16" slant cut.
Unbleached "Vintage" bone nut blank 2-1/16" x 3/8" x 1/4".
Graphite nut for guitar, Black, 1-5/8" x 3/16" x 1/8".
Unbleached "Vintage" bone nut blank 1-7/8" x 5/16" x 1/8".
Bone nut for 12-string guitars, with string slots, 1-15/16†x 7/32“ x 3/8â€.
Slotted bone nut for classical guitar, 2" x 15/64" x 11/32", string spacing 1-11/16".
Truss rod nuts (4 pcs.) for Gibson ® guitars, (10-32) Brass.
Glow in the dark side dot set, glows green, 2.3 mm, (12 pcs.).
Kahler ® locking clamp (behind the nut), with screws and hex wrench.
Schaller Shim set for Floyd Rose ® locking nuts. 3x 0.1 mm pieces.
Sold successfully for over 50 years under the “Micro” brand, the new Grover® model is produced using a totally new, but exact reproduction die cast...
View full detailsSuper masking tape for binding and fret board work, 3/4" x 60 yards.
Allparts guitar fingerboard protector for 25.5 inch scale guitars. Slides under strings to prevent damage to frets and fingerboard during transpo...
View full detailsBullet truss rod nuts (2 pcs.) for Fender ® guitars (10-32) Chrome. Thread is #10-32TPI Outer diameter: 0.35" Inner diameter: 0.16"
Turquoise reconstituted stone fingerboard inlay dots, 1/4" 6.35mm (12 pcs.).
Floyd Rose ® style locking nut for 1-5/8" nut width, includes hardware. Allparts #BP-0026. String Spacing 1-13/32" Length: 1-5/8" Width: 5/8" Radi...
View full detailsFloyd Rose ® style locking nut for 1-5/8" nut width, includes hardware. String Spacing 1-7/16" Length: 1-11/16" Width: 5/8" Radius: 12"
Single action, Fender® style truss rod, 17-1/2" with "+" nut. Rectangular anchor
Vintage Clone clay colored fingerboard dots, 1/4" (10 pcs.) and side dots 3/32" (10 pcs.).
Plastic slotted nuts for steel string guitars, 1-3/4 x 9/32 x 7/32"
Truss rod nuts (2 pcs.) for Fender ® guitars, phillips head (10-32), Chrome.