Bulk Shop

4-Way Oak blade switch, with stainless steel screws for Tele ® mod.

250K ohm audio pot, CTS, vintage style, solid shaft with nut, lock and dress washer.

Staggered height posts Gotoh SD91 tuning keys, vintage style, 6-in-line, with hardware, 15:1. Post Heights  1st and 2nd (e and B) - 28/32" Tall 3...

Side dot rods, 5/64" 2 mm diameter (40 pcs. - 1-7/8" long).

Tuning key screws (16 pcs.), small size for enclosed keys, #2 x 3/8" long.

Extra nuts for pots and input jacks (25 pcs.).

Short neck plate screws (4 pcs.), phillips head, #8 x 1-3/8".

Round string guides (2) with screws for guitar.

Copper shielding tape, with conductive adhesive backing, 12 inches x 12 inches. 

250K ohm push/pull audio taper potentiometer, with nut and washer.

DEEP ROUND NUT FOR TOGGLE SWITCHES Our "Deep Round Nut for Toggle Switches" is a great replacement nut for your 3-way toggle switch when the thread...

Plastic oval buttons (6 pcs.) for gluing or melting on old style keys.

Tremolo arm tips (5), plastic.

1/4" input jack, stereo, Switchcraft #L12B, with 3/8" long threaded bushing, with nut & washer.

Gotoh SG381 tuning keys, 3 x 3, with large button, with hardware, 16:1. *Photo in line drawing shows Gotoh 07 button.  Our TK-0963 keys comes with ...

On-On-On mini switch, DPDT, round bat, with mounting hardware.

Soap Bar pickup mounting screws (4 pcs.), #4 x 1-1/2" long, phillips head.

22 Gauge vintage style stranded wire, with braided shield, with cloth insulator. Allparts #GW-0837.

Bone saddle for classical guitar, 3-3/16" x 3/32" x 3/8".

Unbleached bone nut with radiused bottom for Fender ®, 1-11/16" x 1/4" x 1/8".

Gotoh SD91 locking tuning keys, vintage style, 6-in-line, with hardware, 15:1.

Metric bridge height screws (12 pcs.), for guitar, hex head, M3 x 8 mm.

.02 mfd ceramic disc capacitors (5 pcs.).

Bone nut shaped for Martin ® guitars with slanted bottom and sides.

Unbleached "Vintage" bone saddle for acoustic guitar, 4-1/8" x 1/8" x 3/8".

1/4" Input jack with 2 tip contacts, Switchcraft #2T11, with nut and washer.

No-Load 500K ohm tone pot, CTS, split, knurled shaft, with hardware.

No-Load 250K ohm tone pot, CTS, split, knurled shaft, with hardware.

On-Off-On mini switch, DPDT, flat bat, with mounting hardware.

Bridge mounting screws (5 pcs.), for guitar/bass, #5 x 1" long, phillips oval head.

Bone saddle extra-long, 4" x 3/32" x 15/32".

The Original Grover® Sta-Tite™ machine head now available with an 18:1 gear ratio for more precise tuning. Still with the classic styling and butte...

300K ohm audio pot, CTS, split, knurled shaft, vintage style back, with hardware..

Heat shrink tubing, 1/8 in. inside diameter.

Unbleached "Vintage" bone nut blank 2-1/16" x 3/8" x 3/16" slant cut.

Tuning key screws (16 pcs.), #3 x 1/2" long.

String ferrules (4 pcs.) for bass, 3/8", Gotoh.

Unbleached "Vintage" bone nut blank 2-1/16" x 3/8" x 1/4".

Extra black oxide or zinc plated CTS dress washers for US/imperial pots and input jacks (25 pcs.). Specifications Outside Diameter - 5/8" (15.8mm)...

Heat shrink tubing, 1/16 in. inside diameter.

Bridge height screws (12 pcs.), for guitar, hex head, #4 - 40 x 3/8".

Pickup mounting screws (8), countersunk for vintage style pickguards, 6 springs, #6-32 x 3/4".   Nickel

1 Meg ohm audio taper potentiometer CTS, solid shaft, with hardware.

Strap button screws (4 pcs.), phillips head.

Unbleached "Vintage" bone nut blank 1-7/8" x 5/16" x 1/8".

Metric humbucking pickup mounting screws (4), 3.0 x 24.5mm, phillips, with springs (4).

500K ohm push/pull audio pot, 3/4" long threaded bushing, split shaft, DPDT, with hardware.

Tremolo mounting screws (6 pcs.), #6 x 1" long.