Allparts

CTS 500K SPLIT SHAFT AUDIO POT Specifications: Ohm rating: 500k - 20% tolerance Split, and knurled 1/4” shaft with nut Lock & Dress Washer Alu...

Speed knobs (2), vintage style numbers, fits USA split shaft pots.

Bell knobs (2), vintage style numbers, fits USA split shaft pots.

Modern pickguard for Stratocaster®.  Fits USA spec Fender®.  Not compatible with Squire®.   Specifications Standard Colors: 3-ply, 0.090" thick Pe...

Bone nut for Gibson® electric guitars with string slots, 1-11/16 x 3/16" x 11/32”.

Gotoh SD91 tuning keys, vintage style, 6-in-line set, with hardware, 15:1.

Modern style pickguard for Telecaster®.  Fits USA spec Fender®.  Not compatible with Squire®.   Specifications Standard colors: 3-ply, 0.090" thic...

Slotted bone nut with radiused bottom for Fender®, 1-11/16" x 1/4" x 1/8". Allparts #BN-0206. 

Single Gotoh GB707 sealed bass tuning key, with hardware, 20:1.

250K ohm audio pot, CTS, vintage style, split knurled shaft with nut, lock and dress washer.

Gotoh SG381 mini tuning keys, 6-in-line, with hardware, 16:1. *Photo in line drawing shows Gotoh 07 button.  Our TK-0760 keys comes with the Gotoh ...

Economy bass tuning key, sealed, compact, 20:1.

Vintage style pickguard for Telecaster®.  Fits USA spec Fender®.  Not compatible with Squire®.   Specifications 1-ply  0.060" thick (clear, miror,...

Tremolo spring cover, fits standard USA Strat ® spec.

Pickguard with adhesive backing for acoustic guitar.

Tremolo arm with white tip, Gotoh, fits USA tremolo (10-32).

Economy tuning keys, vintage style, 6-in-line, with hardware, 14:1.

Schaller RT series Retro-Trem arm system for Floyd Rose ® or Schaller locking tremolo.

Economy tuning keys, 6-in-line, with hardware, 18:1.

Finishes : C, GG, B, CK Saddle Material : Steel String Spacing : 10.8mm

The B5, sometimes referred as the Bigsby “horseshoe” is designed for flat top solid body guitars. Attaching via four screws to a guitar’s top, the ...

Gotoh SD91 locking tuning keys, vintage style, 6-in-line, with hardware, 15:1.

Gotoh VT100 vintage style tremolo, short drilled steel block, with hardware, 2-3/16" string spacing . Includes arm, springs, claw, and all screws.

Gotoh SG360 mini tuning keys, Schaller style, 6-in-line, with hardware, 14:1. Allparts #TK-7760.

Designed for use on arch top electric guitars.  Commonly used with Gibson® Les Pauls® and 335s Specs: Model Name: B7 Series: Original Kalamazoo Li...

Vintage style 3 saddle steel bridge for Tele ®, tilt compensated saddles, 2-3/16" string spacing.

Acoustic guitar bridge, no finish, (1 mm oversize) 6" long, 2-3/16" string spacing.

Economy tuning keys, diagonal mounting holes, 6-in-line, with hardware, 14:1.

The Mid-Size series is made with the same quality as the other Rotomatic® models. Slightly larger than the Mini Rotomatics®, the mid size series fe...

Vintage style 3 saddle, steel bridge for Tele ®, with screws, 2-3/16" string spacing.

Single Gotoh GB350 lightweight aluminum sealed bass key, 20:1.

The 205 Series is the ultimate in sleek design and performance. Small and lightweight, these precision-made machine heads fit guitar headstocks tha...

Tuning keys with 2 mounting pins, 6-in-line, with hardware, 18:1.

Single lightweight bass key 1.8 oz., screw-in bushing, 1/2" wide post, 20:1, bass side.

Single Schaller M4 180 (light) sealed bass key, with hardware, 20:1. Elegance and lightness for electric basses Experience the lighter side of heav...

Floyd Rose ® style locking nut for 1-5/8" nut width, includes hardware. Allparts #BP-0026. String Spacing 1-13/32" Length: 1-5/8" Width: 5/8" Radi...

Floyd Rose ® style locking nut for 1-5/8" nut width, includes hardware. String Spacing 1-7/16" Length: 1-11/16" Width: 5/8" Radius: 12"

Gotoh vintage style bass tuning keys, 4-in-line, large post, with hardware, 28:1.

Vintage style, 6 saddle, steel bridge for Tele ®, with screws, 2-3/16" string spacing.

Single Wilkinson bass key, screw-in bushing, 20:1.

Gotoh 510 Delta series tuning keys, 6-in-line, with hardware, 18:1.

Vibramate® V5 adapts Bigsby® B5 to fit on Les Paul ® without permanent modification.

*Designed for use on thin electric hollow and semi-hollow guitars Specs: Model Name: B3 Series: Original Kalamazoo Line Manufacturing Method: Sand...

Our SRO-L replacement neck for Stratocaster® is “officially licensed by Fender®” and made to exacting quality standards in Japan.  For our lefty pl...

*Designed for use on large hollow body guitars Specs: Model Name: B6 Series: Original Kalamazoo Line Manufacturing Method: Cast Manufacturing Mat...

Steel tremolo block for vintage style tremolo, with screws.

Our TRO-L replacement neck for Telecaster® is “officially licensed by Fender®” and made to exacting quality standards in Japan.  With its vintage f...

Now you can install a Bigsby Vibrato on your Telecaster® guitar without drilling any holes! The Vibramate V5-TEV Stage II Model Mounting Kit is des...