Tailpieces

The B5, sometimes referred as the Bigsby “horseshoe” is designed for flat top solid body guitars. Attaching via four screws to a guitar’s top, the...

Stop bar tailpiece, with USA thread studs & anchors, 3-1/4" stud spacing.

*Designed for use on arch top electric guitars Specs: Model Name: B7 Series: Original Kalamazoo Line Manufacturing Method: Cast Manufacturing Mat...

Studs and anchors only for stop tailpiece, fits Gibson ®, 5/16" - 24.

Trapeze tailpiece, 1-7/8 string spacing, 6" long.

Economy stop tailpiece, with metric studs & anchors, 3-1/4" stud spacing.

The TonePros Locking Stop Bar Tailpiece T1ZS features standard US threads that fit most USA guitars.  Specifications: Thread: 5/16 – 24 US Threa...

1" tremolo spring for Bigsby ®. Gold model is Bigsby ® brand.

Gotoh featherweight stop bar tailpiece, with USA thread studs & anchors, 3-1/4" spacing.

The Vibramate String Spoiler is an ingenious little bracket designed to fit right onto your existing Bigsby Vibrato without any modifications or sp...

Bigsby ® 7/8" tension spring.

Now you can install a Bigsby Vibrato on your carved top Les Paul® guitar without drilling any holes! The Vibramate V7-LP Model Mounting Kit is des...

Mandolin tailpiece, with cover. Screws sold separately: GS-0006 

*Designed for use on flat top electric guitars Specs: Model Name: B50 Series: Lightning Series I Manufacturing Method: Die Cast Manufacturing Mat...

12 String trapeze tailpiece, 2-1/8" string spacing, 5-1/2" long.

Compensated (for unwound G) "lightning bar" wraparound tailpiece, USA thread hardware, Nickel, 3-1/4" spacing.

Chet Atkins 7" arm and assembly for Bigsby ®.

Vibramate ® V5 adapts Bigsby ® B5 to fit on Les Paul ® without permanent modification.

Trapeze tailpiece with three parallelograms for Gibson ® 175 ® and L-5 ®. 7-15/16 in. long 5-3/8 in. from top to hinge 2.25 in. bracket

Banjo tailpiece, clam shell style, Nickel.

*Designed for use on thin electric hollow and semi-hollow guitars Specs: Model Name: B3 Series: Original Kalamazoo Line Manufacturing Method: Sand...

Frequensator style split trapeze tailpiece.

*Designed for use on large hollow body guitars Specs: Model Name: B6 Series: Original Kalamazoo Line Manufacturing Method: Cast Manufacturing Mat...

Short Gibson ® style vibrato with arm. Nickel finish. Used on some Maestro vibrola builds.

The Vibramate V5 Short Tail Mounting Kit is the same as the Original V5 kit but designed for tighter locations such as the SG Classic style guitar...

Now you can install a Bigsby Vibrato on your Telecaster® guitar without drilling any holes! The Vibramate V5-TEV Stage II Model Mounting Kit is des...

The TonePros® locking Studs are designed to lock down any wraparound bridge or stop tailpiece. TonePros locking studs provide 100% of the contact a...

Wraparound stop tailpiece, with adjusting set screws, USA studs & anchors, Nickel, 3-1/4" spacing.

Economy trapeze, Chrome, 1-15/16" string spacing, 5-1/2" long.

*Designed for use on arched top electric guitars Specs: Model Name: B70 Series: Lightning Series I Manufacturing Method: Die Cast Manufacturing M...

Bent tailpiece for resonator style guitars, Chrome, 2-1/8" string spacing, 4-5/8" long.

Long Gibson ® style vibrato with arm and cover. Used on some Maestro vibrola builds.

Wilkinson by Gotoh wraparound stop tailpiece/bridge, adjustable B/E and D/A, 3-1/4" spacing.

Fancy trapeze tailpiece for ES-175 ® new style, 2" string spacing, 5-1/4" long.

Bigsby ® Sorkin (bow-tie) bridge, with flat base, for wound G string, Nickel.

Trapeze tailpiece, larger 4-hole plate for thick bodies, 2" string spacing, 5-5/8" long.

Gotoh featherweight stop tailpiece, adjusting set screws, hardware, Nickel, 3-1/4" stud spacing.

Now you can install a Bigsby B7 Vibrato on your arch top guitar without drilling any holes! The Vibramate V7-335 Model Mounting Kit is designed fo...

Metric studs and anchors only for stop tailpiece, M8 x 1.25.

Bigsby ® bridge, with flat base, for unwound G string.

Now you can install a Bigsby B7 Vibrato on your arch top guitar without drilling any holes! The Vibramate V7-335 Model Mounting Kit is designed fo...

Wilkinson wraparound stop tailpiece/bridge, adjustable B-G piece, Chrome, 3-1/4" .

*Designed for use on thin hollow body and semi-hollowbody guitars Specs: Model Name: B30 Series: Lightning Series I Manufacturing Method: Die Cas...

12 String stop tailpiece, with USA thread studs/anchors, 3-1/4" stud spacing.

*Designed for use on Telecaster® style guitars Specs: Model Name: B16 Series: Original Kalamazoo Line Manufacturing Method: Sand Cast Manufacturin...

*Designed for use on arched top electric guitars Specs: Model Name: B12 Series: Original Kalamazoo Line Manufacturing Method: Sand Cast Manufactur...

Now you can install a Bigsby Vibrato on your American Standard Telecaster® style guitar without drilling any holes! The Vibramate V5-TEAS-1 Model ...

*Designed for use on thin hollowbody and semi-hollowbody guitars Specs: Model Name: B11 Series: Original Kalamazoo Line Manufacturing Method: San...