Allparts

500K ohm CTS mini pot, audio taper, split shaft, with hardware. Allparts #EP-5486. 

Bone saddle for acoustic guitar, radiused top, 3" x 7/64" x 3/8".

Radiused bone nut with flat bottom, 1-11/16" x 1/4" x 1/8".

Gotoh SD90 vintage style tuning keys, 3 x 3, plastic keystone buttons, 15:1.

Vintage style pickguard for Stratocaster®.  Fits USA spec Fender®.  Not compatible with Squire®.   Specifications 1-ply  0.060" thick (clear optio...

250K CTS mini pot, audio taper, split shaft, with hardware. Allparts #EP-5485. 

New Vintage machine uses a die-cast, two-piece housing for additional strength and precision. The unique bearing surface in the housing provides a ...

CTS 500K-500K CONCENTRIC AUDIO POT 500K Stacked concentric Audio Taper Potentiometer to work with USA sized knobs and intended for easy pickguard m...

1 Meg ohm audio taper potentiometer CTS, split, knurled shaft, with hardware.

Standard 4-hole steel neckplate with random 5-digit serial number. Fits guitar and bass. Screws not included with chrome version. Aged finish...

Silicone surgical tubing for replacing pickup springs, 1-foot.

Finishes : C, GG, B, CK Saddle Material : Steel String Spacing : 10.8mm

Humbucking pickup ring set - neck and bridge, with curved bottom, for Epiphone®. Allparts #PC-6733.

Bone nut for P.Bass ®, with string slots, 1-5/8" x 1/8" x 3/16".

4-Way Oak blade switch, with stainless steel screws for Tele ® mod.

250K ohm audio pot, CTS, vintage style, solid shaft with nut, lock and dress washer.

On-Off-On slide switch, Switchcraft, for Mustang ®, with screws.

4-Pole, double wafer, 5-way Super Switch for guitar, with stainless steel screws, Oak Grigsby.

Knob set (3) with set screws for J. Bass ®, fits USA solid shaft pots.

Plastic bridge pin set with dot, slotted (6 pcs.).

Copper shielding tape, with conductive adhesive backing, 1 inch x 5 feet.

Set of 6 bone bridge pins and 1 end pin, slotted.

The B5, sometimes referred as the Bigsby “horseshoe” is designed for flat top solid body guitars. Attaching via four screws to a guitar’s top, the ...

Dome knobs (2) push-on, fits split shaft pots, 11/16" tall x 3/4" wide.

Adapter bushings (6 pcs.), return to vintage post keys 13/32" (10mm) OD, 1/4" ID, Gotoh.

Back plate & switch cover combo for Gibson® Les Paul®, 1-ply. Part number PG-0814

Side dot rods, 5/64" 2 mm diameter (40 pcs. - 1-7/8" long).

Staggered height posts Gotoh SD91 tuning keys, vintage style, 6-in-line, with hardware, 15:1. Post Heights  1st and 2nd (e and B) - 28/32" Tall 3...

Tuning key screws (16 pcs.), small size for enclosed keys, #2 x 3/8" long.

Economy tuning keys, diagonal mounting holes, 3 x 3, Chrome, with hardware, 14:1.

Short neck plate screws (4 pcs.), phillips head, #8 x 1-3/8".

Extra nuts for pots and input jacks (25 pcs.).

Locking tuning keys, minis, 6-in-line, with hardware, 18:1, lock knob on back.

Spring washers for bass keys, between button and housing (8 pcs.).

Roller tunematic, with hardware, 15" radius 2-1/16" string spacing, 2-29/32" post spacing. Includes ABR-1 Style studs and wheels

Economy tuning keys, 3 x 3, with hardware, 18:1.

9-Volt battery terminals (5 pcs.), 6" wire leads, rigid plastic.

Concentric stacked knob set, with set screws, fits import stacked pots. Metric sizing.

Bone nut for J.Bass ®, with string slots, 1-9/16" x 1/8" x 3/16".

Copper shielding tape, with conductive adhesive backing, 12 inches x 12 inches. 

Round string guides (2) with screws for guitar.

250K ohm push/pull audio taper potentiometer, with nut and washer.

Stop bar tailpiece, with USA thread studs & anchors, 3-1/4" stud spacing.

Bell knobs (2), numbers 0 - 11, fits USA split shaft pots.

Pickguard for Jazz Bass®.  Fits USA spec Fender®.  Not compatible with Squire®.   Specifications Standard colors: 3-ply, 0.090" thick Pearloids an...

Plastic oval buttons (6 pcs.) for gluing or melting on old style keys.

DEEP ROUND NUT FOR TOGGLE SWITCHES Our "Deep Round Nut for Toggle Switches" is a great replacement nut for your 3-way toggle switch when the thread...

Set of two identical metal humbucking pickup rings with flat bottom and straight side. Allparts #PC-0741.