Allparts

Truss rod cover screws (8 pcs.), phillips head, #2 x 1/4".

Tremolo arm with white tip, Gotoh, fits USA tremolo (10-32).

Binding, .060" x 5/16" x 66" ABS.

Economy tuning keys, vintage style, 6-in-line, with hardware, 14:1.

PACK OF GUITAR TUNER WASHERS - 12 Pack Replacement washers for your tuning machine. Specifications:      • Nylon/Metal     • Mounts between tuner ...

Recessed neck screw bushings (4 pcs.) for guitar or bass.

Finger board inlay dots, 1/4" 6.35mm.  Packs of 12: Abalone Mother of Pearl Packs of 50: Black White Red Cream Pearloid Parchment

Schaller RT series Retro-Trem arm system for Floyd Rose ® or Schaller locking tremolo.

On-On mini switch, DPDT, round bat, with mounting hardware.

Roto-Grip Locking Rotomatics® utilizes the famous 18:1 Rotomatics® design with a “thumb screw” mechanism which locks the string into place. Insert ...

250K ohm mini pot, audio taper, split knurled shaft (coarse spline), with nut & washer. 

Pickguard for Precision Bass®.  Fits USA spec Fender®.  Not compatible with Squire®.   Specifications Standard colors: 3-ply, 0.090" thick Pearloi...

500K ohm audio pot, CTS, vintage style, split knurled shaft with nut, lock & dress washer.

Bone nut with radiused bottom for Fender ®, 1-11/16" x 1/4" x 1/8".

5-Way blade switch, with stainless steel screws, Oak Grigsby.

Switch knobs (2 pcs.) for Tele ® fits USA switch, Black.

On-On-On mini switch, DPDT, flat bat, with mounting hardware.

Pickup mounting screws with cone shaped springs, #6 - 32 x 3/4". Bulk packs of 50 do not include springs.

250K ohm linear pot for tone, CTS, split, knurled shaft, with hardware.

Vintage Deluxe style 3x3 on a strip, off-white plastic buttons, 15:1, with hardware, Gotoh.

Plastic bridge pins, slotted (50 pcs.) no dot.

Slotted bone nut for acoustic guitar, 1-11/16" x 3/16" x 11/32".

On-On mini switch, DPDT, flat bat, with mounting hardware.

Description: Non Blushing Accelerator GluDry speeds up the cure of your CA glues and finishes, with no pitting, hazing, crazing, blooming, yellowin...

Pickguard for Gibson® Les Paul ®.  Not compatible with Epiphone®

This bell-shaped truss rod cover is a suitable replacement for many Gibson® branded instruments.

Fully compensated bone saddle, radiused top, 2-13/16" x 1/8" x 3/8".

Cup jack plate for Tele ®, with clip.

Oversized strap buttons (2), with screws.

Extra star washers for pots and input jacks (25 pcs.), all steel.

Pickguard support for Les Paul® with screw and nut. Allparts #AP-0620.

"Witch hat" volume knobs (2), fits USA split shaft pots.

Short dome knobs (2), Gotoh VK3, with set screw, 5/8" tall x 3/4" wide. Post Hole Size: Nickel, Gold, Black, and Chrome fit USA Split Shaft (6mm) ...

"Witch hat" tone knobs (2), fits USA split shaft pots.

Economy tuning keys, 6-in-line, with hardware, 18:1.

Metal knobs (2), Gotoh, set screw, matches stack knob MK 3320-002, split shaft, 3/4" x 3/4". Allparts #MK-3330.

Tremolo arm, metric, fits imports, 6 mm.

.047 mfd ceramic disc capacitors (5 pcs.).

Double wide bone saddle, 3-1/4" x 1/4" x 7/16".

1/4" end pin jack, stereo, with 3 exterior screw holes.

Gotoh SG381 tuning keys, 3 x 3, with hardware, 16:1. *Photo in line drawing shows Gotoh 07.  Our TK-0962 keys come with the Gotoh 05 

Slotted radiused bone nut with flat bottom, 1-11/16" x 1/4" x 1/8".

Concentric stacked knob set, vintage style,with set screws, fits USA stacked pots. Available in Gold, Black and Chrome.

Barrel string guides (2) with screws for guitar, Gotoh.

Metric toggle switch knobs (2 pcs.) for imported guitars.

Double action truss rod. Measures 18 and 3/32 x 1/4 wide x 3/8 inch. Allows for both forward and backward adjustments of the truss rod to correct...

Speed knobs (2), numbers 0 - 11, fits USA split shaft pots.

500K CTS Push-Pull DPDT pot, audio taper, 10% tolerance, split shaft, with hardware. Allparts #EP-5586 .