PC-0741 Flat Profile Humbucking Pickup Ring Set
Set of two identical metal humbucking pickup rings with flat bottom and straight side. Allparts #PC-0741.
Set of two identical metal humbucking pickup rings with flat bottom and straight side. Allparts #PC-0741.
Black speed knobs (2) with tint, vintage style numbers, fits USA split shaft pots.
Classical tuning keys, Nickel, with “butterfly†White plastic buttons, 14:1, 1-3/8" spacing.
22 Gauge vintage style push back cloth covered stranded wire set, 3-1/2' Black / 3-1/2' White.
3 x 3 tuning keys, open gear on a plank, with white buttons, 14:1, 1-3/8" spacing, Nickel.
1/4" input jack, stereo, Switchcraft #L12B, with 3/8" long threaded bushing, with nut & washer.
On-On-On mini switch, DPDT, round bat, with mounting hardware.
Gotoh SG381 tuning keys, 3 x 3, with large button, with hardware, 16:1. *Photo in line drawing shows Gotoh 07 button. Our TK-0963 keys comes with ...
View full detailsStratocaster® pickguard with humbucker/single coil/single coil (H/S/S) configuration. Fits USA spec Fender®. Not compatible with Squire®. Speci...
View full detailsSoap Bar pickup mounting screws (4 pcs.), #4 x 1-1/2" long, phillips head.
Tremolo arm for Mexican guitar bridges, Chrome.
22 Gauge vintage style stranded wire, with braided shield, with cloth insulator. Allparts #GW-0837.
Wilkinson compensated saddle set from TB 5129-001 (set of 3) for Tele ®, Brass.
Bone saddle for classical guitar, 3-3/16" x 3/32" x 3/8".
Unbleached bone nut with radiused bottom for Fender ®, 1-11/16" x 1/4" x 1/8".
Compensated bone saddle for Taylor® guitars 2-13/16" x 1/8" x 3/8"
Compensated bone saddle for Gibson ® guitars 2-13/16 inch x 1/8 inch x 15/32 inch.
Bridge saddles (set of 6) narrow spacing, w/springs & screws for Strat ®, 2-1/16" spacing.
Ebony bridge pin set, slotted (6 pcs.), with Ebony end pin.
25K ohm mini pot, audio taper, split, knurled shaft, with nut and washer.
Gotoh SD91 locking tuning keys, vintage style, 6-in-line, with hardware, 15:1.
String bar for Floyd Rose ® style locking nuts, with screws, Gotoh.
Metric bridge height screws (12 pcs.), for guitar, hex head, M3 x 8 mm.
Gotoh tunematic, with hardware, 2-1/16" string spacing, 2-29/32" post spacing.
Humbucking pickup ring set - neck and bridge, for Epiphone®, plastic. Flat bottoms and slanted sides. Allparts #PC-6743.
500K/250K ohm stacked concentric pot, CTS, with nut, lock and dress washer.
Switch knobs (2 pcs.) for Strat ®, fits imported switch.
28 Gauge 4-conductor shielded stranded wire, foil shield, plus drain, 25 feet. Allparts #GW-0836-000.
Gotoh VT100 vintage style tremolo, short drilled steel block, with hardware, 2-3/16" string spacing . Includes arm, springs, claw, and all screws.
Sealed 3x3 tuning keys, screw-in bushings, metal keystone, 14:1.
Concentric stacked knob set fits Bartolini, Duncan, EMG pots, with set screws, Gotoh. Allparts #MK-3320 . Available in Gold, Black and Chrome.
PULLIT™ Knob Puller This guitar-tech "secret weapon" easily removes push-on plastic, wood or metal knobs without additional tools or risk to your i...
View full detailsShim set for locking saddles (set of 12 pcs.), each piece - .008" thick.
Bone nut shaped for Martin ® guitars with slanted bottom and sides.
The Grover Tune-O-Matic style bridge is a direct original equipment replacement for all guitars utilizing this type. The saddle can be individually...
View full detailsUnbleached "Vintage" bone saddle for acoustic guitar, 4-1/8" x 1/8" x 3/8".
1/4" Input jack with 2 tip contacts, Switchcraft #2T11, with nut and washer.
No-Load 250K ohm tone pot, CTS, split, knurled shaft, with hardware.
No-Load 500K ohm tone pot, CTS, split, knurled shaft, with hardware.
BULLET GUITAR JACK TIGHTENER Say goodbye to loose 1/4-inch jacks forever! The Bullet Jack Tightener holds your guitar's jack in place while tighten...
View full detailsGotoh non-tremolo bridge, with steel saddles, with screws, 2-1/16" string spacing.
Adapter bushings (6 pcs.), return to vintage post keys 3/8" (9.5mm) OD, 1/4" ID.