PG-0552 11-hole Pickguard for Stratocaster®
Modern pickguard for Stratocaster®. Fits USA spec Fender®. Not compatible with Squire®. Specifications Standard Colors: 3-ply, 0.090" thick Pe...
View full detailsModern pickguard for Stratocaster®. Fits USA spec Fender®. Not compatible with Squire®. Specifications Standard Colors: 3-ply, 0.090" thick Pe...
View full detailsModern style pickguard for Telecaster®. Fits USA spec Fender®. Not compatible with Squire®. Specifications Standard colors: 3-ply, 0.090" thic...
View full detailsVintage style pickguard for Telecaster®. Fits USA spec Fender®. Not compatible with Squire®. Specifications 1-ply 0.060" thick (clear, miror,...
View full detailsTremolo spring cover, fits standard USA Strat ® spec.
Pickguard with adhesive backing for acoustic guitar.
Pickguard for Precision Bass®. Fits USA spec Fender®. Not compatible with Squire®. Specifications Standard colors: 3-ply, 0.090" thick Pearloi...
View full detailsPickguard for Gibson® Les Paul ®. Not compatible with Epiphone®
Vintage style pickguard for Stratocaster®. Fits USA spec Fender®. Not compatible with Squire®. Specifications 1-ply 0.060" thick (clear optio...
View full detailsBack plate & switch cover combo for Gibson® Les Paul®, 1-ply. Part number PG-0814
Pickguard for Jazz Bass®. Fits USA spec Fender®. Not compatible with Squire®. Specifications Standard colors: 3-ply, 0.090" thick Pearloids an...
View full detailsStratocaster® pickguard with humbucker/single coil/single coil (H/S/S) configuration. Fits USA spec Fender®. Not compatible with Squire®. Speci...
View full detailsPickguard blank (10" x 12") with adhesive back for acoustic.
Accessory kit for Strat ®, 3-ply spring cover, 3 PU covers, 1 vol., 2 tone, 1 switch, 1 arm knob.
Pickguard for USA spec Esquire® Vintage style pickguard for Esquire®. Fits USA spec Fender®. Not compatible with Squire®. Specifications 1-ply...
View full detailsPickguard for Jazzmaster®. Fits USA spec Fender®. Not compatible with Squire®. Specifications 3-ply 0.090" thick 13-screw hole pattern Fits ...
View full detailsPickguard for Telecaster® with humbucker configuration. Fits USA spec Fender®. Not compatible with Squire®. Specifications Standard colors: 3-...
View full detailsPickguard blank (12" x 18"), 1-ply, thin .060".
Pickguard for Gibson® ES-335®, short configuration. Not compatible with Epiphone®
Stratocaster® pickguard with dual humbucker at bridge configuration. Fits USA spec Fender®. Not compatible with Squire®. Specifications Standa...
View full detailsStratocaster® pickguard with no cutouts. Fits USA spec Fender®. Not compatible with Squire®. Specifications Standard colors: 3-ply, 0.090" thi...
View full detailsTortoise pickguard with hummingbird imprint and adhesive backing. - This is not a vintage correct Pick guard for a Gibson® Hummingbird
Tremolo spring cover, 1 slot, 3-ply, .090".
Stratocaster® pickguard with single humbucker at bridge configuration. Fits USA spec Fender®. Not compatible with Squire®. Specifications Stan...
View full detailsReplacement Pickguard for L-5 ® cutaway, with 5-ply binding. Nitrocellulose may not be as scratch resistant as original hard plastic on some models.
Pickguard for L-5 ® non-cutaway, with 5-ply binding.
Tremolo spring cover, no string holes, 1-ply, .060".
Pickguard for Rickenbacker ® bass 4001, 1-ply, 1974 and later.
Pickguard for Gibson® Les Paul®, vintage style with no beveled edges in ivory. Not compatible with Epiphone®
Pickguard for Jaguar®. Fits USA spec Fender®. Not compatible with Squire®. Specifications 3-ply 0.090" thick 10-screw hole pattern Fits USA ...
View full detailsPickguard for Gibson® Les Paul® Deluxe (small pickups), Cream 1-ply. Not compatible with Epiphone®
Pickguard for Strat ®, (11 screw holes) '62 hole pattern, Mint Green 3-ply (MG/B/MG), .090".
Pickguard for Tele ®, cut for Strat ® pickup in middle, (8 screw holes). Pickguard for Tele® with Strat® style middle pickup configuration. Fits U...
View full detailsPickguard for Gibson® ES-335®, long version. Not compatible with Epiphone®
Pickguard for Mustang®. Fits USA spec Fender®. Not compatible with Squire®. Specifications 3-ply 0.090" thick 12-screw hole pattern Fits USA...
View full detailsPickguard for Gibson® SG ®, 2-humbucking (5 holes). Not compatible with Epiphone®
Tremolo spring cover, with access panel, 1-ply, .060".
Stratocaster® pickguard with humbucker/single coil/humbucker (H/S/H) cutout. Fits USA spec Fender®. Not compatible with Squire®. Specifications...
View full detailsThis is a replacement nameplate cover for the Vibramate V7-335 Mounting Kit designed for Arch Top guitars. It can also be used on any other guitar...
View full detailsPickguard for Tele ® Thinline, (12 screw holes), White Pearloid 3-ply (WP/W/B), .100".
Pickguard for Rickenbacker ® bass 4001, 1-ply, 1973 and earlier. .060".